ledlightsaustralia.com » LED Downlights http://ledlightaustralia.com led lights,energy efficient lighting,led light bulbs,led downlights Mon, 12 Sep 2011 04:49:36 +0000 en hourly 1 http://wordpress.org/?v=3.2.1 MR16 12V AC/DC Dimmable cool white http://ledlightaustralia.com/mr16-12v-acdc-dimmable/ http://ledlightaustralia.com/mr16-12v-acdc-dimmable/#comments Fri, 12 Nov 2010 23:56:44 +0000 gary http://ledlightaustralia.com/?p=595

This dimmable MR16 LED 3 x 2W bulb has exceptional lumen output   - cool white: 540 lumens   

Description:

  • 3 x 2 W
  • 12V AC/DC
  • Bridgelux chip
  • MR16 fitting
  • 60 degree beam angle
  • 50,000 hours lifespan
  • dimmable
  • size 50 x 51 mm
  • no UV or IR radiation
  • no lead or mercury

The bulb fits into your existing halogen downlight and will work on a redback electronic transformer or the old black iron core transformer.

Suitable for converting your existing downlights to LEDs (just think – no more continually replacing those OTHER bulbs) in bedrooms, halls, carports, lounge rooms, toilets, garden lights. Not recommended for kitchens, office or anywhere you need really good daylight light. Use the 15 -18W LED downlights in kitchen, office etc.

We supply quality LEDs at reasonable prices that you will be happy with for the very long life of the product and you are welcome to ask for any information regarding the installation, suitability, use, etc of any of our LEDs.

]]> http://ledlightaustralia.com/mr16-12v-acdc-dimmable/feed/ 2 LED Downlights 6x3W Cool White http://ledlightaustralia.com/led-downlights-6x3w-cool-white/ http://ledlightaustralia.com/led-downlights-6x3w-cool-white/#comments Sun, 27 Dec 2009 20:29:29 +0000 gary Ideal for existing households.This downlight is specially manufactured to fit existing holes.There are no gaps to let dust, insects etc drop through or let air out of the room into the roof area and so will help the cooling in summer and heating in winter of your home.There is no need to buy covers for old halogen downlights and pay someone to put them in.

Above is a photo of a kitchen bench lit by a halogen on the left and this LED downlight on the right (end of benchtop). You can actually see what you are doing when preparing meals, reading mail etc. It is an amazing light which people have bought for their office, dining room, places to read by, etc. It makes such a difference to ‘seeing’.

You should have an accredited driver (transformer) because you want to get the full life span of your light at maximum brightness with a good quality driver.It is also important for insurance purposes to have SAA approval for the driver.

  • Product Description
    Specification:
    Input Voltage: AC 100-260V;
    Constant Current: DC 700mA
    Power consumption: 18W;
    LED type: Cree LED 6 x 3W;
    Luminous Flux: 18W Cool White for 1080lm;
    Beam Angle: 60degrees;
    Cut-out: 92mm to suit Australian cutout sizes
    Material: PMMA, Aluminium alloy;
    N. W.: 456g
    Average rated life: 50,000hours;
    Ambient humidity: 85%;
    Operating temperature: 65 degrees c
    Colour temperature: Cool white(5500-6500k) Safety Assurance: CE and RoHS;
    Warranty: 2 years;
    Application:
    It can be used in homes, stage, shopping mall, guesthouse, hotel, museums, art galleries, meeting room, exhibition, etc
  • PRODUCT FEATURES:
    No UV or IR Radiation;
    Low Power Consumption;
    Long lived performance’
    Even Lighting, Non-halation, High intensity;
    Unique Radiation Design;
    Constant current circuit;
    Safe and easy to assemble;
    With Power Supply Adapter.
    • ]]>     http://ledlightaustralia.com/led-downlights-6x3w-cool-white/feed/ 0     LED Downlights 6x3W Warm White http://ledlightaustralia.com/led-downlights-6x3w-warm-white/ http://ledlightaustralia.com/led-downlights-6x3w-warm-white/#comments Sun, 27 Dec 2009 20:29:29 +0000 gary Ideal for existing households.This downlight is specially manufactured to fit existing holes.There are no gaps to let dust, insects etc drop through or let air out of the room into the roof area and so will help the cooling in summer and heating in winter of your home.There is no need to buy covers for old halogen downlights and pay someone to put them in.

    You should have an accredited driver because you want to get the full life span of your light at maximum brightness with a good quality driver.It is also important for insurance purposes to have SAA approval for the driver.

  • Product Description
    Specification:
    Input Voltage: AC 100-260V;
    Constant Current: DC 700mA
    Power consumption: 18W;
    LED type: Cree LED 6 x 3W;
    Luminous Flux:
    18W Warm White for 780lm;
    Beam Angle: 60 degrees;
    Cut-out: 92mm to suit Australian cutout sizes
    Material: PMMA, Aluminium alloy;
    N. W.: 456g
    Average rated life: 50,000hours;
    Ambient humidity: 85%;
    Operating temperature: 65 degrees c
    Color temperature: warm white(2700-3500k)
    Safety Assurance: CE and RoHS;
    Warranty: 2 years;
    Application:
    It can be used in homes, stage, shopping mall, guesthouse, hotel, museums, art galleries, meeting room, exhibition, etc
  • PRODUCT FEATURES:
    No UV or IR Radiation;
    Low Power Consumption;
    Long lived performance’
    Even Lighting, Non-halation, High intensity;
    Unique Radiation Design;
    Constant current circuit;
    Safe and easy to assemble;
    With Power Supply Adapter.
    • ]]>     http://ledlightaustralia.com/led-downlights-6x3w-warm-white/feed/ 0     Constant Current LED Driver 700mA http://ledlightaustralia.com/led-driver-700ma/ http://ledlightaustralia.com/led-driver-700ma/#comments Sun, 27 Dec 2009 20:29:29 +0000 gary Ideal for existing households.You should have an accredited driver because you want to get the full life span of your light at maximum brightness with a good quality driver.It is also important for insurance purposes to have SAA approval for the driver.This driver has SAA approval and EMC.Input is 100-240 volts AC and drives 3 to 6 x 3W LEDs.

    Warning: Do not connect the light to the driver while the driver is energised as this will fuse the light and void any warranty.These drivers are current transformers and the secondary output voltage increases dramatically if it is open circuited while there is power to the driver.

    Specification Driver

    • Input voltage: 100V-240Vac
    • Input frequency: 50Hz/60Hz
    • Output voltage: 3-34Vdc
    • Output power: 3-18W
    • Output current: 700mA
    • Power factor: <0.99
    1. this driver works with all colours of standard and custom Hi power LED light sources
    2. electrical characteristics at 25 degrees c ambient temperature
    3. protection against short circuit and overload
    4. the total value of Vf should be under output voltage;cannot turn on/off on the output side
    5. before switching on the supply voltage, all LEDs must be completely wired and connected as per warning above.

    Dimensions: 141mmL x 45mmW x 26mmH

    ]]>     http://ledlightaustralia.com/led-driver-700ma/feed/ 0     Constant Current LED Driver 350mA http://ledlightaustralia.com/led-driver-350ma/ http://ledlightaustralia.com/led-driver-350ma/#comments Sun, 27 Dec 2009 20:29:29 +0000 gary Ideal for existing households.You should have an accredited driver because you want to get the full life span of your light at maximum brightness with a good quality driver.It is also important for insurance purposes to have SAA approval for the driver.This driver has SAA approvaland EMC.Input is 100 – 240 volts AC and drives 3 to 16 x 1W LEDs.It has short circuit and overload protection.

    Warning: Do not connect the light to the driver while the driver is energised as this will fuse the light and void any warranty.These drivers are current transformers and the secondary output voltage increases dramatically if it is open circuited while there is power to the driver.

    Specification Driver

    • Input voltage: 100V-240Vac
    • Input frequency: 50Hz/60Hz
    • Output voltage: 10-54Vdc
    • Output power: 3-16W
    • Output current: 350mA
    • Power factor: <0.99
    1. this driver works with all colours of standard and custom Hi power LED light sources
    2. electrical characteristics at 25 degrees c ambient temperature
    3. protection against short circuit and overload
    4. the total value of Vf should be under output voltage;cannot turn on/off on the output side
    5. before switching on the supply voltage, all LEDs must be completely wired and connected as per warning above.

    Dimensions: 141mmL x 45mmW x 26mmH

    ]]>     http://ledlightaustralia.com/led-driver-350ma/feed/ 0     LED Light & Driver Pack 6x3W Cool White http://ledlightaustralia.com/led-lightdriver-pack-6x3w-cool-white/ http://ledlightaustralia.com/led-lightdriver-pack-6x3w-cool-white/#comments Sun, 27 Dec 2009 20:29:29 +0000 gary This downlight has been manufactured to fit the 92mm hole which exists in most Australian homes.Remove the old halogen and there is no need to recut the hole in probably 98% of cases.These downlights produce more light than halogens – about 1 1/2 times and use the same 60 degree beam angle.

    Above is a photo of a kitchen bench lit by a halogen on the left and this LED downlight on the right (end of benchtop). You can actually see what you are doing when preparing meals, reading mail etc. It is an amazing light which people have bought for their office, dining room, places to read by, etc. It makes such a difference to ‘seeing’.

    It is advisable to purchase an accredited driver to achieve the full life span of your light at maximum brightness.It is also important for insurance purposes to have SAA approval for the driver.Our drivers have SAA approval.

    This LED light uses 18W, while halogen lights use 50+W. You should be able to use less of these downlights than halogens and have a better colour rendition and very little heat.

  • Product Description Downlight
    Specification:
    Input Voltage: AC 100-260V;
    Constant Current: DC 700mA
    Power consumption: 18W;
    LED type: Cree LED 6 x 3W;
    Luminous Flux:
    18W Cool White for 1080lm;
    Beam Angle: 60 degrees;
    Cut-out: 92mm
    Material: PMMA, Aluminium alloy;
    Average rated life: 50,000hours;
    Ambient humidity: 85%;Operating temperature: 65 degrees c;
    Colour temperature: Cool white(5500-6500k), Safety Assurance: CE and RoHS;
    Warranty: 2 years;
    Application:
    It can be used in homes, stage, shopping malls, guesthouses, hotels, museums, art galleries, meeting rooms, exhibitions, etc
  • PRODUCT FEATURES:
    No UV or IR Radiation;
    Low Power Consumption;
    Long lived performance’
    Even Lighting, Non-halation, High intensity;
    Unique Radiation Design;
    Constant current circuit;
    Safe and easy to assemble;
    With Power Supply Adapter.

    • Ideal for existing households.You should have an accredited driver because you want to get the full life span of your light at maximum brightness with a good quality driver.It is also important for insurance purposes to have SAA approval for the driver.This driver has SAA approval and EMC.Input is 100-240 volts AC and drives 3 to 6 x 3W LEDs.

    Warning: Do not connect the light to the driver while the driver is energised as this will fuse the light and void any warranty.These drivers are current transformers and the secondary output voltage increases dramatically if it is open circuited while there is power to the driver.

    Specification Driver

    • Input voltage: 100V-240Vac
    • Input frequency: 50Hz/60Hz
    • Output voltage: 3-34Vdc
    • Output power: 3-18W
    • Output current: 700mA
    • Power factor: <0.99
    1. this driver works with all colours of standard and custom Hi power LED light sources
    2. electrical characteristics at 25 degrees c ambient temperature
    3. protection against short circuit and overload
    4. the total value of Vf should be under output voltage;cannot turn on/off on the output side
    5. before switching on the supply voltage, all LEDs must be completely wired and connected as per warning above.

    Dimensions: 141mmL x 45mmW x 26mmH

    ]]>     http://ledlightaustralia.com/led-lightdriver-pack-6x3w-cool-white/feed/ 0     LED Light & Driver Pack 6x3W Warm White http://ledlightaustralia.com/led-lightdriver-pack-6x3w-warm-white/ http://ledlightaustralia.com/led-lightdriver-pack-6x3w-warm-white/#comments Sun, 27 Dec 2009 20:29:29 +0000 gary This downlight has been manufactured to fit the 92mm hole which exists in most Australian homes.Remove the old halogen and there is no need to recut the hole in probably 98% of cases.These downlights produce more light than halogens – about 1 1/2 times and use the same 60 degree beam angle.

    Above is a photo of a kitchen bench lit by a halogen on the left and this LED downlight (but in cool white), on the right (end of benchtop). You can actually see what you are doing when preparing meals, reading mail etc. It is an amazing light which people have bought for their office, dining room, places to read by, etc. It makes such a difference to ‘seeing’.

    It is advisable to purchase an accredited driver to achieve the full life span of your light at maximum brightness.It is also important for insurance purposes to have SAA approval for the driver.Our drivers have SAA approval.

    This LED light uses 18W, while halogen lights use 50+W. You should be able to use less of these downlights than halogens and have a better colour rendition and very little heat.

  • Product Description Downlight
    Specification:
    Input Voltage: AC 100-260V;
    Constant Current: DC 700mA
    Power consumption: 18W;
    LED type: Cree LED 6 x 3W;
    Luminous Flux:
    18W Warm White for 780lm;
    Beam Angle: 60 degrees;
    Cut-out: 92mm
    Material: PMMA, Aluminium alloy;
    Average rated life: 50,000hours;
    Ambient humidity: 85%;
    Operating temperature: 65 degrees c
  • Colour temperature: warm white(2700-3500k)
    Safety Assurance: CE and RoHS;
    Warranty: 2 years;
    Application:
    It can be used in homes, stage, shopping malls, guesthouses, hotels, museums, art galleries, meeting rooms, exhibitions, etc

    • PRODUCT FEATURES:
    No UV or IR Radiation;
    Low Power Consumption;
    Long lived performance

    Even Lighting, Non-halation, High intensity;
    Unique Radiation Design;
    Constant current circuit;
    Safe and easy to assemble;
    With Power Supply Adapter.

    Ideal for existing households.You should have an accredited driver because you want to get the full life span of your light at maximum brightness with a good quality driver.It is also important for insurance purposes to have SAA approval for the driver.This driver has SAA approval and EMC.Input is 100-240 volts AC and drives 3 to 6 x 3W LEDs.

    Warning: Do not connect the light to the driver while the driver is energised as this will fuse the light and void any warranty.These drivers are current transformers and the secondary output voltage increases dramatically if it is open circuited while there is power to the driver.

    Specification Driver

    • Input voltage: 100V-240Vac
    • Input frequency: 50Hz/60Hz
    • Output voltage: 3-34Vdc
    • Output power: 3-18W
    • Output current: 700mA
    • Power factor: <0.99
    1. this driver works with all colours of standard and custom Hi power LED light sources
    2. electrical characteristics at 25 degrees c ambient temperature
    3. protection against short circuit and overload
    4. the total value of Vf should be under output voltage;cannot turn on/off on the output side
    5. before switching on the supply voltage, all LEDs must be completely wired and connected as per warning above.

    Dimensions: 141mmL x 45mmW x 26mmH

    ]]>     http://ledlightaustralia.com/led-lightdriver-pack-6x3w-warm-white/feed/ 0