Ideal for existing households.You should have an accredited driver because you want to get the full life span of your light at maximum brightness with a good quality driver.It is also important for insurance purposes to have SAA approval for the driver.This driver has SAA approvaland EMC.Input is 100 – 240 volts AC and drives 3 to 16 x 1W LEDs.It has short circuit and overload protection.

Warning: Do not connect the light to the driver while the driver is energised as this will fuse the light and void any warranty.These drivers are current transformers and the secondary output voltage increases dramatically if it is open circuited while there is power to the driver.

Specification Driver

• Input voltage: 100V-240Vac
• Input frequency: 50Hz/60Hz
• Output voltage: 10-54Vdc
• Output power: 3-16W
• Output current: 350mA
• Power factor: <0.99

1. this driver works with all colours of standard and custom Hi power LED light sources
2. electrical characteristics at 25 degrees c ambient temperature
3. protection against short circuit and overload
4. the total value of Vf should be under output voltage;cannot turn on/off on the output side
5. before switching on the supply voltage, all LEDs must be completely wired and connected as per warning above.

Dimensions: 141mmL x 45mmW x 26mmH